Cruzin Cooler 500 watt hi performance power kit-20mph+ from Fast Scooters

Description

"
New optional Digital Readout /Digi and 4 led throttles available as pictured in pics above,must send a note with what "#" is in the picture!
"
---50 & 51 Series Kit Only---
(will not work with 52 series,we sell that kit in our ebay store)
Fast Scooters makes them fast and last!
What is this kit?
Need more speed?
Need more pulling power?
Need more run time?
This kit WILL require 1 matching battery-MATCH WHAT YOU HAVE
This custom performance kit,safely, jolts the motor with 36 volts to get it moving off the start while controlling the top rpm..It bypasses the factory rpm limiter of 3000 rpm and brings it to 4800 rpm which is still within the motors safe rpm range.. You WILL gain a lot more bottom torque and 7-10 mph top speed gains and 30% more run time!.Your cooler WILL do 19-24 mph so we supply a key to keep un trained people off it.
I have been selling MANY of these kits worldwide with great results with nothing but great feedback,you will never want to ride a stock one again..
This takes less than a hour if your handy and its pretty easy and well worth it in everyway.I send directions with pictures and answer my phone at all hours to help and stand behind the product.
This kit WILL require 1 matching battery (not included),which will fit on the motor side of the cooler so you will not lose any of your cooler space.
If you want to view a video that shows a modified 500 watt pink cooler out running a 1000 watt cruzin cooler,simply go to google and type in "1000 watt cruzin cooler" and watch the first video that comes up..
What Does The Kit Include?
This kit comes with 3 led lights which can be used as brake or taillights, if you want both brake and taillights you must also purchase this Ebay Item #143352129544 and we will send a 3 led kit not the 2 pictured and package together.
1-Prefit 10 gauge battery wire
*1-36 volt TriMax throttle with built in key (2 keys)--Take note if you want the DigiMax throttle with key in anodized Blue,Red or Chrome you must send a note--these are pictured in the last pictures above.
*- Matching Grip for thropttle of your choice
*1-36 volt Performance controller -good for future possible builds up to 1000 Watts!
*3 LED tail lights or can be used as brake lights-prewired ready to plug in
* 36v 1.6 amp charger
*1 little modified screwdriver for throttle wire removal
*4 zip ties to tidy up things at the end
*4 screws to mount controller
*4 Heat Shrink butt connectors
*Directions and full phone and text support
*This kit WILL require 1 matching battery-NOT INCLUDED
I personally check every item to make sure everything works before I ship..
If you have a 50 series it goes right in,if you have a 51 series you will have to ad some ends on your brake switch wires and your charging wires but if your not sure just call..I can substitute lights for a brake handle or charging port-just send a note..
How hard is this to install?
No modification to the lid is needed on 51 series Coolers to clear the 3rd battery but most of the 50 series require some small modification to the inner part of the lid to clear the battery edge which can simply be cut with a utility knife where needed.
Brake or taillight kit requires you to drill out a hole in the center of the 2 existing controller holes on the rear switch plat,then simply bolt in the housings,slide in the prewired LED lights and hot glue or super glue in place and plug into controller.
Controller requires removing the old one,mount the new controller in front of the side vent and screw it into place with supplied stainless screws,then simply plug everything in..
Throttle with key requires removing alen head on bottom of throttle and sliding off the handle, remove 4 wires from 6 pin connector with supplied screwdriver then fish the new wires threw and install new wires back into place exact place with supplied color chart..
Battery install requires removal of both batteries,cut lower battery bracket rods leaving 5 inches,cut the 2 bolts extra thread that come threw the side chrome wheel support..install batteries and wires as they were but move the top battery over and install the extra battery,bend and trim bracket as shown and reinstall..Then simply connect the last supplied wire..
Customer Service--941-404-5915
Customer feedback below..
***Thanks Tom, All installed. WOW!!! What a difference!!!!! Kicks A$$!!!
***Hey Tom just wanted to tell you this cooler is soo much faster than my friends 750 Watt now,I can't wait to find someone with a 1000 Watt,thanks for all the help.
***Got the kit installed today,its sick!,thanks man!
***Your the man,im amazed at this thing now,i did a wheelie on accident.lol.Thanks!
***This is the best thing anyone could ever do to these cruzin coolers,ill be sending alot of customers your way.
***If anyone ever questions this kit,have them call me.thanks for the help and have a great day.
***I drove my cruzin cooler for 7 hours and it still never showed low.My kids love it now,it sounds like a supercharger when it goes by.FAST as hell is all i can say.