WG26/34/232/serial Wiegand/COM port/Bidirectional transmission (16 hex)Converter

Description

Converter /WG26/34 232/ serial Wiegand /COM port / Bidirectional Wigan transmission (16 hex)  Male head
RS232/
Wigan bidirectional converter
instructions
A,
brief introduction
HDC09
Wigan (converter support
Wiegand
) and signal
RS232
Bidirectional conversion between signals, in which the same equipment can realize the Wigan
->RS232
and
RS232->
Wigan.
The conversion process of automatic identification through the signal transmission direction, there is no need to plug the interface or other settings. Support standard converter
WG26/WG34
Wiegand signal format,
RS232
transport
enter
/
Optional output
Sixteen
(229
HEX
And (text)
ASCII
) format, communication parameters
9600/N/8/1
. If you need to support other private or Wigan
RS232
The protocol format, can provide
Information customization.
Converter with high anti-interference
MCU
Processing chip, built-in watchdog circuit, automatic test equipment work state, abnormal work automatically when reset, ensure conversion
Is never crashes. The whole machine is made of
SMT
(surface mount) production process, improve the stability of long-term work. Through the practical application of converter can be long-term
Seven
*
Twenty-four
Work without maintenance.
Two,
Converter interface parameters:
One
RS232
Interface
baud rate
:
Nine thousand and six hundred
test
:
N
Data bits
:
Eight
Stop bit
:
One
Two
Wigan interface
Support for Wigan
Twenty-six
Wigan.
Thirty-four
.
Others such as Wigan
35/36/37/42
Can provide limited support.
special
/
Private information provided by the user agreement Wigan custom.
Three,
Applicable occasions
This product at the same time with Wigan
->232
and
232->
Wigan function
,
According to the signal source automatic conversion
,
as
:
Data from
RS232
The input interface, output automatically by wigan;
data
Input from Wigan, automatically by the
RS232
Output. This design ensures that the user does not need to distinguish between the installation and use of the converter.
Signal source or send and receive
Direction as long as
Data conversion can be realized according to the correct connection of the interface type.
One
Wiegand
26/34
input
- > RS232
output
To convert the output signal for Wigan equipment for the serial output, such as: access control
IC
Card reader,
card reader, barcode reader, fingerprint access control, face
Recognition machine
And so on, after the conversion of the output data
Can access the computer serial port, through the general serial port debugging software or super terminal observation results. Users also
Can be developed through their own software
On serial port
Output data processing.
Two
RS232
(serial) input
- >
Wiegand
26/34
output
For converting serial signal output to the output devices such as Wigan.
IC/ID
Card reader, computer
strand
Export,
RFID
Card reader, two-dimensional code scanning gun, bar code scanning gun,
fingerprint
And so on,
After the conversion of Wigan
Output can be accessed directly on the market support
WG26/34
Access controller.
Four,
Converter installation and use
One
Photo Converter
Two
Power supply
Converter needs to be used
9-15V/50mA
Power supply, if the connection access controller can directly use the access control
The input port controller at
12V
Power supply, static working current
Two
0mA
. If the connection is a Wiegand interface card
Shared power supply for reader and reader. Users can also be external
9-12v
Power adapter.
Three
Input / output format for conversion data
Users can choose according to their own needs to buy the corresponding product, such as the user is not clear equipment,
It is best to communicate with the developer prior to purchase, to avoid unnecessary mistakes.
A.
Sixteen
Binary system
HEX
Input / output
When the output of the conversion device is
Sixteen
Binary system, can use this product, because
WG26/34
Maximum only knowledge
Don't 3/
Four
A byte, the input of the device.
/
The output should be within this range.
Beyond this range, the user can
Provide information to customize.
#
Wigan format
RS232 format
explain
One
WG26
0xFF
0xFF 0xFF
(
Three
byte
HEX
)
No.
One
Byte is
AREA CODE
Two
WG34
0xFF 0xFF 0xFF 0xFF
(
Four
byte
HEX
)
B.
(text
ASCII
The input and output code)
When the application equipment input
/
The output is the text data, can use this product. Wiegand
26/34
number
According to the input converter, from
RS232
Output interface
most
Ten
position
ASCII
The digital code,
Such as:
One billion two hundred and thirty-four million five hundred and sixty-seven thousand eight hundred and ninety
,
Or in
RS232
Maximum input interface
Ten
A digital interface output signal can be in Wigan wigan.
As in the computer serial port to send text"
One billion two hundred and thirty-four million five hundred and sixty-seven thousand eight hundred and ninety
"To serial converter, converter at
Output access access controller will be in the access control management software
A credit card number to see"
One billion two hundred and thirty-four million five hundred and sixty-seven thousand eight hundred and ninety
",
If the bar code scanner output"
Eleven million two hundred and twenty-three thousand three hundred and forty-four
"To the converter serial port, corresponding to the credit card number is
meeting
Is"
Eleven million two hundred and twenty-three thousand three hundred and forty-four
".
(send text
0009019418
)
(also received access management software
Nine million nineteen thousand four hundred and eighteen
The front.
000
The software is omitted)
Similarly, when the device is converted to output converter at Wigan, serial output the corresponding text information,
as
ID
Card reader to read the card number is"
One billion two hundred and thirty-four million five hundred and sixty-seven thousand eight hundred and ninety
",
Serial output is text converter
"
One billion two hundred and thirty-four million five hundred and sixty-seven thousand eight hundred and ninety
".
(please note
ID
Cards printed on the card
0009019418
)
(received is the text
0009019418
)
Four
Connection method of converter
A.
Computer serial port connection
Converter (female) via the serial port extension line and the computer serial port connection, also can be used directly
USB
Serial line with computer
USB
Connect the mouth, for example in the use of notebook computer.
Figure:
B.
Connect the output device (Wigan
IC/ID
Card reader, face recognition instrument.....).
C.
Connect the input device (Wigan access controller)
Shipping Detail:
1.We only ship to your confirmed address,Please make sure your shipping address is correct before purchase
2.If you choose the Economy Shipping.The delivery time is normally 15-45 days. Please be patient.If you are urgent.Maybe you can choose the Expedited Shipping, That is Express . Such as DHL/Fedex.
3.If your address is
Brazil
,please let me know your Tax number.Thanks!
Feedback:
1.Off
ering the best quality products and service are our main mission, and this is depending on your feedback , so please give us timely advice.
2.If you are satisfied with our products and service,please kindly help leave positive feedback and we will do the same for you:
We care about all our customers very much, and will try solving any unexpected problem eventually.If you are not satisfied with our products.please feel free to contact us in time,we will try our best to settle the problem until you are happy!
There are US Plug,EU Plug ,AU Plug and UK Plug For your optional .Please leave message to us which  Plug you want .Or we will send randomly.Thanks!